I’m all about that data, about that data. It’s Time to Report Fall 2016 Calf Data

Have you utilized ASA’s online data entry recently? Reporting/registering cattle on the ASA website has never been easier than it is today. We encourage each member who has internet capability to explore this invaluable resource. If you are new to the website or just need a refresher, go ahead and give us a call and a staff member will gladly guide you through your first entry. Remember, every dam enrolled on your 2016 Fall inventory either needs to have a calf reported or a productivity code (reason why you are not reporting a calf to the dam) to ASA by June 1 to be included in the fall sire summary evaluation or by June 15, 2017 to keep your account in compliance with data reporting requirements.

How to start an Online Job to enter your Fall 2016 Calf Data
Go to Herdbook Services
Select LOGIN from the top right hand corner of your screen
Account # – ASA Member Number
Password – *Password assigned by ASA for your member account
*If you have not had a password assigned by ASA you will need to contact our office and ask to speak with someone in member services so they can assign one.
Go to Data Entry, select Online
Make sure Fall is highlighted
Select the button that says Update 2016 – Fall Calves
Screenshot from 2017-05-16 09-21-01

Remember, each dam listed on your online spreadsheet will need to have a calf reported or productivity code(reason why she did not calve in given year). Every single dam that is listed needs to have a 2016 born calf reported or a productivity code, no exceptions!

Below are examples of common questions from members when they are reporting their calf data online.

Example (1) – Dam had twins

Since the dam is only pre-loaded in the spreadsheet once, you will need to enter one calf in the row with the dam pre-listed and after the last dam in your spreadsheet, click in that row and hit your enter key, which adds blank rows to the spreadsheet. Click in to the DamRegNbr column and enter the dam’s ASA registration number (placing her in your spreadsheet twice, once for each calf). Then enter your second calf in this row. You will end up with two rows for this dam, one for each calf. Make sure the MBC code is entered correctly to denote twins. Note: each calf must have a different tattoo, you cannot have two calves within your herd identified the same.

Example (2) – Simmental ET calf

When reporting online, the DamRegNbr column (first column of spreadsheet) is where you would enter the Recipient cow (birth dam) ASA number. If the recipient dam is enrolled on your THE inventory, fill in the ET calf information on her line.  If the recipient dam is not enrolled on your THE, leave those columns blank.  To enter the Donor Dam’s information, select the tab at top of the spreadsheet (above the blue column headers) and enter in the Donor Dam’s ASA Registration number in the DonorRegNbr column and hit your enter key. All of the Donor Dam’s information will automatically fill in. Then select your Animal tab to enter the rest of the calf information. You will need to indicate whether the calf was a Frozen Embryo(6) or Fresh Embryo(9) transfer in the MBC column of your spreadsheet. Note: The donor dam will not appear on the Animal tab of your spreadsheet, so once you click back on Animal you will not see her information, rest assured, it is still there.
ET Calf Reporting

Example (3) – Calf was grafted to another dam, how do I report?

Record the calf data to the genetic dam that physically gave birth to the calf, not the foster dam who the calf was grafted on to. The foster dam does not receive credit for raising the grafted calf. To indicate the calf was raised by a foster dam, under the weaning tab in the MC column you will enter a 4, thus ensuring it will not be included in a contemporary group.

Example (4) – Dam left the herd prior to calving(sold, died, disappeared, etc.)

You will need to record a productivity code for this female indicating why you’re not reporting a calf to her for 2016.  The productivity columns are located under the BrthDam tab.  Click on the Productivity column header for a help box that displays the 11 different codes you can choose from.  Next you will need to fill in the productivity year, which in this case is 2016.  By reporting a productivity code, you are informing the database that this dam did not have a calf in the year 2016.  There will not be any calf data information listed under the Animal tab for this female, just a productivity code and year under the BrthDam tab. Note: A productivity code should only be used if there is not any calf data to report for the given year and cannot be used in addition to calf data, it’s either a calf is being reported or a productivity code, not both.
Productivity Reporting

Example (5) – Cow/Calf pair was sold without papers, how do I indicate the calf is no longer a part of the herd and left prior to weaning?

You will record all the required calf information: tattoo, sire, sex, tattoo location, date of birth, MBC, AI, HPS and color.  Then you will fill in the appropriate calf removal code.  For a list of calf removal codes, click on the column header and all will be displayed in a help box(you may have to scroll down to see the complete list).  A calf removal code should be assigned to an animal prior to 18 months of age, identifying the animal was not kept as a replacement.
Screenshot from 2016-03-14 09:26:01

Example (6) – Dam calved the first part of January instead of in December. How do I report the calf so it’s part of the fall contemporary group?

If you scroll over to the far right of the online job there is a column labeled CalfYear.  Type in 2016.  This tells the computer to contribute this record to 2016 instead of 2017 for this female and will contemporary the calf with the rest of the 2016 born animals.

Screenshot from 2017-05-16 09-26-16

If you have any questions while entering calving data, please contact our office at 406.587.4531 and enter in the #4 to be connected to THE department or email the@simmgene.com.

THE Spring 2016 Calf Reporting – Are you in Compliance?

Spring 2016 compliance reporting is now in effect.  What does this mean?  It means that each dam enrolled on your Spring 2016 THE inventory needs to either have a calf reported or a productivity code(reason why she did not calve).  If the reporting requirement has not been met, your account is considered to be in non-compliance and you will not be able to process any registrations/transfers until the data has been turned in.  There are three ways to submit the compliance information: online, spreadsheet or by paper submission.

Online

Log-in to Herdbook Services
Go to Data Entry, select Online
There are four tabs on the left, select the bottom one, Manual Job
Under Job Type, leave it as selected in Animal Data Reporting
Enter in a Job Title, i.e., Last of 2016 calf data
From the right under default groups, select the last one, Dams Not in Compliance
Click the black dot in to As Dams
Select Start New Job
This will start an online job that lists all of the dams lacking data for 2016 spring calving season.  If the dam had a 2016 born calf you will go ahead and enter the information.  If she did not calve, report a productivity code and the productivity year as 2016. To view more information on reporting 2016 calving data, click here.

Screenshot from 2017-03-17 16-47-37

Keep in mind, if you are not reporting a 2016 calf record, you will need to record a productivity code for the female indicating why she did not calve in calendar year 2016.  The productivity columns are located under the BrthDam tab.  Click on the Productivity column header for a help box that displays the 11 different codes you can choose from.  Next you will need to fill in the productivity year, which in this case is 2016.  By reporting a productivity code, you are informing the database that this dam did not have a calf in the calendar year 2016.  There will not be any calf data information listed under the Animal tab for this female, just a productivity code and year under the BrthDam tab. Note: A productivity code should only be used if there is not any calf data to report for the given year and cannot be used in addition to calf data, it’s either a calf is being reported or a productivity code, not both.

Productivity Reporting

Download/Upload Spreadsheet

Log-in to Herdbook Services
Go to Data Entry, select Download
From the left under default groups, select the last one, Dams Not in Compliance
On the right under Animal Entry, select Standard File
Under Download File, select As Dams
Select Document type, i.e., MS Excel
Select Download
This will open a spreadsheet that lists all of the dams lacking data for 2016 spring calving season.  If the dam had a 2016 born calf you will go ahead and enter the information.  If she did not calve, report a productivity code and the productivity year as 2016.  After you have filled in the spreadsheet with the necessary information you can either go back to Herdbook Services and upload your file or email to the@simmgene.com and we can process it for you.

Screenshot from 2016-04-08 10:08:00

Paper Submission

Contact ASA and request a non-compliance packet to be mailed out to you.  You will receive a form containing all of your dams that need data reported for 2016 along with any other years your herd is missing data.

Once the non-compliance information has been entered, your account will immediately be considered to be in compliance with THE reporting requirements and you will be able to submit registration/transfers requests at will.

If you have any questions or concerns about THE and compliance reporting please email the@simmgene.com or contact our office at 406.587.4531 and select option 4 to be connected to THE department.

Fall 2015 Calf Data Reporting – is Your Herd in Compliance?

Fall 2015 compliance reporting is now in effect.  What does this mean?  It means that each dam enrolled on your Fall 2015 THE inventory needs to either have a calf reported or a productivity code(reason why she did not calve).  If the reporting requirement has not been met, your account is considered to be in non-compliance and you will not be able to process any registrations/transfers until the data has been turned in.  There are three ways to submit the compliance information: online, spreadsheet or by paper submission.

Online
Log-in to Herdbook Services
Go to Data Entry, select Online
There are four tabs on the left, select the bottom one, Manual Job
Under Job Type, leave it as selected in Animal Data Reporting
Enter in a Job Title, i.e., Last of 2015 calf data
From the right under default groups, select the last one, Dams Not in Compliance
Click the black dot in to As Dams
Select Start New Job
This will start an online job that lists all of the dams lacking data for 2015 calving.  If the dam had a 2015 born calf you will go ahead and enter the information.  If she did not calve, report a productivity code and the productivity year as 2015. To view more information on reporting 2015 calving data, click here.

Screenshot from 2016-04-08 10:13:34

Keep in mind, if you are not reporting a 2015 calf record, you will need to record a productivity code for the female indicating why she did not calve in calendar year 2015.  The productivity columns are located under the BrthDam tab.  Click on the Productivity column header for a help box that displays the 11 different codes you can choose from.  Next you will need to fill in the productivity year, which in this case is 2015.  By reporting a productivity code, you are informing the database that this dam did not have a calf in the year 2015.  There will not be any calf data information listed under the Animal tab for this female, just a productivity code and year under the BrthDam tab. Note: A productivity code should only be used if there is not any calf data to report for the given year and cannot be used in addition to calf data, it’s either a calf is being reported or a productivity code, not both.

Productivity Reporting

Spreadsheet

Log-in to Herdbook Services
Go to Data Entry, select Download
From the left under default groups, select the last one, Dams Not in Compliance
On the right under Animal Entry, select Standard File
Under Download File, select As Dams
Select Document type, i.e., MS Excel
Select Download
This will open a spreadsheet that lists all of the dams lacking data for 2015 calving.  If the dam had a 2015 born calf you will go ahead and enter the information.  If she did not calve, report a productivity code and the productivity year as 2015.  After you have filled in the spreadsheet with the necessary information you can either go back to Herdbook Services and upload your file or email to the@simmgene.com and we can process it for you.

Screenshot from 2016-04-08 10:08:00

Paper Submission

Contact ASA and request a non-compliance packet to be mailed out to you.  You will receive a form containing all of your dams that need data reported for 2015 along with any other years your herd is missing data.

Once the non-compliance information has been entered, your account will immediately be considered to be in compliance with THE reporting requirements and you will be able to submit registration/transfers requests at will.

If you have any questions or concerns about THE and compliance reporting please email the@simmgene.com or contact our office at 406.587.4531 and select option 4 to be connected to THE department.

Talk Data to Me-It’s Time to Report 2016 Spring Calf Data

Have you utilized ASA’s online data entry recently? Reporting/registering cattle on the ASA website has never been easier than it is today. We encourage each member who has internet capability to explore this invaluable resource. If you are new to the website or just need a refresher, go ahead and give us a call and a staff member will gladly guide you through your first entry. Remember, every dam enrolled on your 2016 Spring inventory either needs to have a calf reported or a productivity code (reason why you are not reporting a calf to the dam) to ASA by November 1 to be included in the spring sire summary evaluation or by December 15, 2016 to keep your account in compliance with data reporting requirements.

How to start an Online Job to enter your Spring 2016 Calf Data

Go to Herdbook Services

Select LOGIN from the top right hand corner of your screen

Account # – ASA Member Number

Password – *Password assigned by ASA for your member account
*If you have not had a password assigned by ASA you will need to contact our office and ask to speak with someone in member services so they can assign one.

Go to Data Entry, select Online

Make sure Spring is highlighted

Select the button that says Update 2016 – Spring Calves

screenshot-from-2016-09-14-16-44-00

Remember, each dam listed on your online spreadsheet will need to have a calf reported or productivity code(reason why she did not calve in given year).  Yes, this includes dams that have been sold or are no longer part of your herd.

You will not be able to submit your calf data job through completion until it is free of errors.  Make sure when you have completed entering your data that you click on the Errors tab.  Each tab is a different layer to your online data entry spreadsheet.  The errors will be displayed for each row of data.  I recommend tackling your errors one at a time.  Fix one item, click off of the cell so it saves the data, go back to errors and correct the next one until they’re all gone.

screenshot-from-2016-09-14-17-01-48

Below are examples of common questions from members when they are reporting their calf data online.

Example (1) – Dam had twins

Since the dam is only pre-loaded in the spreadsheet once, you will need to enter one calf in the row with the dam pre-listed and after the last dam in your spreadsheet, click in that row and hit your enter key, which adds blank rows to the spreadsheet. Click in to the DamRegNbr column and enter the dam’s ASA registration number (placing her in your spreadsheet twice, once for each calf). Then enter your second calf in this row. You will end up with two rows for this dam, one for each calf. Make sure the MBC code is entered correctly to denote twins. Note: each calf must have a different tattoo, you cannot have two calves within your herd identified the same.

Example (2) – Simmental ET calf

When reporting online, the DamRegNbr column (first column of spreadsheet) is where you would enter the Recipient cow (birth dam) ASA number. If the recipient dam is enrolled on your THE inventory, fill in the ET calf information on her line.  If the recipient dam is not enrolled on your THE, leave those columns blank.  To enter the Donor Dam’s information, select the tab at top of the spreadsheet (above the blue column headers) and enter in the Donor Dam’s ASA Registration number in the DonorRegNbr column and hit your enter key. All of the Donor Dam’s information will automatically fill in. Then select your Animal tab to enter the rest of the calf information. You will need to indicate whether the calf was a Frozen Embryo(6) or Fresh Embryo(9) transfer in the MBC column of your spreadsheet. Last but not least, if the ET is a frozen embryo you will need to fill in the Breeder column with the ASA member number of the party who owned the dam at the time of the flush. To access the ownership information, do an Animal Search on the Donor Dam, look to the left hand side of the listed owners and find the appropriate six digit ownership number.  Use that number in the breeder column.  Note: The donor dam will not appear on the Animal tab of your spreadsheet, so once you click back on Animal you will not see her information, rest assured, it is still there.

ET Calf Reporting

Example (3) – Dam left the herd prior to calving(sold, died, disappeared, etc.)

You will need to record a productivity code for this female indicating why you’re not reporting a calf to her for 2016.  The productivity columns are located under the BrthDam tab.  Click on the Productivity column header for a help box that displays the 11 different codes you can choose from.  Next you will need to fill in the productivity year, which in this case is 2015.  By reporting a productivity code, you are informing the database that this dam did not have a calf in the year 2016.  There will not be any calf data information listed under the Animal tab for this female, just a productivity code and year under the BrthDam tab. Note: A productivity code should only be used if there is not any calf data to report for the given year and cannot be used in addition to calf data, it’s either a calf is being reported or a productivity code, not both.

Productivity Reporting

Example (4) – Dam was purchased after THE inventory was submitted and is not listed on my calf data reporting sheet. What do I do?

Manually add the dam to your online data entry job by her ASA registration number on a blank row.  If your job does not have any blank rows available, click in to the very bottom row and hit your enter key on the keyboard a few times. It will create blank rows.  Add the dam and then all the calf data.  When you submit the job through completion if the previous owner of the dam enrolled the dam in their THE, depending on the Option, you may not see an enrollment/registration fee.  If the previous owner did not enroll the dam in their THE, the database will add this female to your THE and invoice your account accordingly.

Example (5) – Calf was dead, no data noted down. How do I report?

See the explanation for example (3) above. If you have no calf data to report for a female you need to assign a productivity code for the year.

If you have any questions while entering calving data, please don’t hesitate to contact our office at 406.587.4531 or email the@simmgene.com.

Spring 2015 Calf Reporting – Are you in Compliance?

Spring 2015 compliance reporting is now in effect.  What does this mean?  It means that each dam enrolled on your Spring 2015 THE inventory needs to either have a calf reported or a productivity code(reason why she did not calve).  If the reporting requirement has not been met, your account is considered to be in non-compliance and you will not be able to process any registrations/transfers until the data has been turned in.  There are three ways to submit the compliance information: online, spreadsheet or by paper submission.

Online

Log-in to Herdbook Services
Go to Data Entry, select Online
There are four tabs on the left, select the bottom one, Manual Job
Under Job Type, leave it as selected in Animal Data Reporting
Enter in a Job Title, i.e., Last of 2015 calf data
From the right under default groups, select the last one, Dams Not in Compliance
Click the black dot in to As Dams
Select Start New Job
This will start an online job that lists all of the dams lacking data for 2015 calving.  If the dam had a 2015 born calf you will go ahead and enter the information.  If she did not calve, report a productivity code and the productivity year as 2015. To view more information on reporting 2015 calving data, click here.
Screenshot from 2016-04-08 10:13:34
Keep in mind, if you are not reporting a 2015 calf record, you will need to record a productivity code for the female indicating why she did not calve in calendar year 2015.  The productivity columns are located under the BrthDam tab.  Click on the Productivity column header for a help box that displays the 11 different codes you can choose from.  Next you will need to fill in the productivity year, which in this case is 2015.  By reporting a productivity code, you are informing the database that this dam did not have a calf in the year 2015.  There will not be any calf data information listed under the Animal tab for this female, just a productivity code and year under the BrthDam tab. Note: A productivity code should only be used if there is not any calf data to report for the given year and cannot be used in addition to calf data, it’s either a calf is being reported or a productivity code, not both.
Productivity Reporting

Spreadsheet

Log-in to Herdbook Services
Go to Data Entry, select Download
From the left under default groups, select the last one, Dams Not in Compliance
On the right under Animal Entry, select Standard File
Under Download File, select As Dams
Select Document type, i.e., MS Excel
Select Download
This will open a spreadsheet that lists all of the dams lacking data for 2015 calving.  If the dam had a 2015 born calf you will go ahead and enter the information.  If she did not calve, report a productivity code and the productivity year as 2015.  After you have filled in the spreadsheet with the necessary information you can either go back to Herdbook Services and upload your file or email to the@simmgene.com and we can process it for you.
Screenshot from 2016-04-08 10:08:00

Paper Submission

Contact ASA and request a non-compliance packet to be mailed out to you.  You will receive a form containing all of your dams that need data reported for 2015 along with any other years your herd is missing data.
Screenshot from 2016-04-08 10:17:20

Once the non-compliance information has been entered, your account will immediately be considered to be in compliance with THE reporting requirements and you will be able to submit registration/transfers requests at will.

If you have any questions or concerns about THE and compliance reporting please email the@simmgene.com or contact our office at 406.587.4531 and select option 4 to be connected to THE department.

Calling for all Spring 2015 Calving Data

Have you tried ASA’s online data entry recently? Reporting/registering cattle on the ASA website has never been easier than it is today. We encourage each member who has internet capability to explore this invaluable resource. If you are new to the website or just need a refresher, go ahead and give us a call and a staff member will gladly guide you through your first entry. Remember, every dam enrolled on your 2015 Spring inventory either needs to have a calf reported or a productivity code (reason why you are not reporting a calf to the dam) to ASA by November 15 to be included in the spring sire summary evaluation or by December 15, 2015 to keep your account in compliance with data reporting requirements.

How to start an Online Job to enter your Spring 2015 Calf Data

Go to Herdbook Services

Select LOGIN from the top right hand corner of your screen

Account # ASA Member Number

Password – *Password assigned by ASA for your member account
*If you have not had a password assigned by ASA you will need to contact our office and ask to speak with someone in member services so they can assign one.

Go to Data Entry, select Online

Make sure Spring is highlighted

Select the button that says Update 2015 – Spring Calves

2015 Spring Calf Data Reporting

Remember, each dam listed on your online spreadsheet will need to have a calf reported or productivity code(reason why she did not calve in given year).

Below are examples of common questions from members when they are reporting their calf data online.

Example (1) – Dam had twins

Since the dam is only pre-loaded in the spreadsheet once, you will need to enter one calf in the row with the dam pre-listed and after the last dam in your spreadsheet, click in that row and hit your enter key, which adds blank rows to the spreadsheet. Click in to the DamRegNbr column and enter the dam’s ASA registration number (placing her in your spreadsheet twice, once for each calf). Then enter your second calf in this row. You will end up with two rows for this dam, one for each calf. Make sure the MBC code is entered correctly to denote twins. Note: each calf must have a different tattoo, you cannot have two calves within your herd identified the same.

Example (2) – Simmental ET calf

When reporting online, the DamRegNbr column (first column of spreadsheet) is where you would enter the Recipient cow (birth dam) ASA number. If the recipient dam is enrolled on your THE inventory, fill in the ET calf information on her line.  If the recipient dam is not enrolled on your THE, leave those columns blank.  To enter the Donor Dam’s information, select the tab at top of the spreadsheet (above the blue column headers) and enter in the Donor Dam’s ASA Registration number in the DonorRegNbr column and hit your enter key. All of the Donor Dam’s information will automatically fill in. Then select your Animal tab to enter the rest of the calf information. You will need to indicate whether the calf was a Frozen Embryo(6) or Fresh Embryo(9) transfer in the MBC column of your spreadsheet. Note: The donor dam will not appear on the Animal tab of your spreadsheet, so once you click back on Animal you will not see her information, rest assured, it is still there.

ET Calf Reporting

Example (3) – Calf was grafted to another dam, how do I report?

Record the calf data to the dam that physically gave birth to the calf, not the foster dam who the calf was grafted on to. The foster dam does not receive credit for raising the grafted calf. To indicate the calf was raised by a foster dam, under the weaning tab in the MC column you will enter a 4, thus ensuring it will not be included in a contemporary group.

Example (4) – Dam left the herd prior to calving(sold, died, disappeared, etc.)

You will need to record a productivity code for this female indicating why you’re not reporting a calf to her for 2015.  The productivity columns are located under the BrthDam tab.  Click on the Productivity column header for a help box that displays the 11 different codes you can choose from.  Next you will need to fill in the productivity year, which in this case is 2015.  By reporting a productivity code, you are informing the database that this dam did not have a calf in the year 2015.  There will not be any calf data information listed under the Animal tab for this female, just a productivity code and year under the BrthDam tab. Note: A productivity code should only be used if there is not any calf data to report for the given year and cannot be used in addition to calf data, it’s either a calf is being reported or a productivity code, not both.

Productivity Reporting

If you have any questions, please contact our office at 406.587.4531 or email the@simmgene.com.

Next eSeminar on THE – Calf Data Reporting and Compliance

Tune in for my next eSeminar on THE calf data reporting called Compliance Made Simple on Tuesday, December 3, at 6pm MST.  We will go over how to report calf data/productivity codes on each female and navigate the online calf data entry spreadsheet. This will be a great chance to ask any questions you may have on online calf data entry.  Reserve your spot today by visiting www.simmental.org and signing up.

Did you miss the first session on THE – it’s as easy as 1, 2, 3?  No worries, you can watch the recorded version at THE Easy as 123.

Webinar II